This occasional accent chair is a charming piece that has been created in contemporary transitional style. The perfect piece to combine with its coordinating collection, or to place with an array of existing furniture pieces, this stunning accent chair features a stream-lined design with a fine fabric upholstery that creates an aesthetic modern look. Exposed wood feet and slightly flared arms keep this chair corresponding with traditional design elements, allowing it to blend in with nearly any new or existing furniture style.
Arm DescriptionContemporary Track Arms with Slight Outward Flair
Arm Description
Contemporary Track Arms with Slight Outward Flair
Leg / Base TypeExposed Wood Leg
Leg / Base Type
Exposed Wood Leg
Leg or Base DescriptionContemporary Tapered Block Legs
Leg or Base Description
Contemporary Tapered Block Legs
Design StyleContemporary
Design Style
Contemporary
Fabric OptionsAvailable in Upholstery Shown
Fabric Options
Available in Upholstery Shown
Optional Upholstery FeaturesExposed Wood, Welt Cords
Optional Upholstery Features
Exposed Wood
Welt Cords
Seat Back DescriptionTight Pulled Seat Back with Contemporary Silhouette
Seat Back Description
Tight Pulled Seat Back with Contemporary Silhouette
Seat DescriptionPlush Upholstered Seat Cushion for Superior Seated Comfort
Seat Description
Plush Upholstered Seat Cushion for Superior Seated Comfort
Arm Type - UpholsteredTrack Arm
Arm Type - Upholstered
Track Arm
Construction & Materials
Seat Support DescriptionSprings are machine tested for durability and lasting support. A sturdy frame provides an anchor for good seating support, while the filling or cushion, augments it. In frames, 8 gauge no-sag wide loop sinuous springs are “s” shaped and run from the front of the seat to the back. An additional 16-gauge stakewire is attached across from side to side to support these springs. This process is done by pneumatically clamping the springs together to tie the individual springs into one unit to prevent the springs from separating or twisting. Back spring clips are autolocking and are made from nylon to help reduce noise. Back springs are 12-gauge sinuous wire. Seat spring clips are constructed from metal to provide strength and are nylon-lined, reducing noise. This makes for a strong seat and provides superior support.
Seat Support Description
Springs are machine tested for durability and lasting support. A sturdy frame provides an anchor for good seating support, while the filling or cushion, augments it. In frames, 8 gauge no-sag wide loop sinuous springs are “s” shaped and run from the front of the seat to the back. An additional 16-gauge stakewire is attached across from side to side to support these springs. This process is done by pneumatically clamping the springs together to tie the individual springs into one unit to prevent the springs from separating or twisting. Back spring clips are autolocking and are made from nylon to help reduce noise. Back springs are 12-gauge sinuous wire. Seat spring clips are constructed from metal to provide strength and are nylon-lined, reducing noise. This makes for a strong seat and provides superior support.
Frame ConstructionFrames are built in-house with hardwood, such as oak, ash, birch, or maple (70%) and plywood or OSB (30%). Lumber is cut and graded in Manufacturers own machine room to help insure quality for the foundation of our recliners. Only hardwood lumber is used, never plywood or OSB in stress points or load-bearing areas of frames. Individual frame pieces are reinforced in the corners and stress points by glue, blocks and staples, much more preferable than nails or screws.
Frame Construction
Frames are built in-house with hardwood, such as oak, ash, birch, or maple (70%) and plywood or OSB (30%). Lumber is cut and graded in Manufacturers own machine room to help insure quality for the foundation of our recliners. Only hardwood lumber is used, never plywood or OSB in stress points or load-bearing areas of frames. Individual frame pieces are reinforced in the corners and stress points by glue, blocks and staples, much more preferable than nails or screws.
Padding & ErgonomicsSeat cushions and frame parts are fabricated in manufacturer’s own foam fabrication facilities to control the quality and feel of each piece. Cushion thickness is kept at a minimum of 4.5 inches to promote comfort and support. Cushions are fabricated from superior (1.8 lb. density, 34-lb. compression) foam and wrapped in 1oz. or 1.8 oz Dacron for comfort and protection. All foams are made with Environmentally-friendly Polyol derived from soy beans and castor beans that require up to 60% less fossil fuel resources than petroleum-based polyols (for every 11 pounds of plant-based polyol, a gallon of crude oil is saved. This results in 36% less global warming emissions). Test results are monitored from every shipment, every day to maintain consistency.
Backs and pillows are air-blown with polyurethane foam or polyester fiber to contour to the body for maximum support and comfort.
Padding & Ergonomics
Seat cushions and frame parts are fabricated in manufacturer’s own foam fabrication facilities to control the quality and feel of each piece. Cushion thickness is kept at a minimum of 4.5 inches to promote comfort and support. Cushions are fabricated from superior (1.8 lb. density, 34-lb. compression) foam and wrapped in 1oz. or 1.8 oz Dacron for comfort and protection. All foams are made with Environmentally-friendly Polyol derived from soy beans and castor beans that require up to 60% less fossil fuel resources than petroleum-based polyols (for every 11 pounds of plant-based polyol, a gallon of crude oil is saved. This results in 36% less global warming emissions). Test results are monitored from every shipment, every day to maintain consistency.
Backs and pillows are air-blown with polyurethane foam or polyester fiber to contour to the body for maximum support and comfort.
TailoringFabrics are cut and sewn in each of this manufacturer’s plants. This allows greater flexibility in scheduling and helps monitor quality. One-half inch seams are used and components are sewn together at a minimum of 5 1/2 to 6 seams per inch.
Tailoring
Fabrics are cut and sewn in each of this manufacturer’s plants. This allows greater flexibility in scheduling and helps monitor quality. One-half inch seams are used and components are sewn together at a minimum of 5 1/2 to 6 seams per inch.
Item & Dimensions
ManufacturerSerta Upholstery by Hughes Furniture
Manufacturer
Serta Upholstery by Hughes Furniture
The 5600 Occasional Accent Chair, made by Serta Upholstery by Hughes Furniture,
is brought to you by Powell's Furniture and Mattress. Powell's Furniture and Mattress is a local furniture store, serving the Fredericksburg, Richmond, Charlottesville, Virginia and Maryland area. Product availability may vary.
Contact us for the most current availability on this product.
Collection Details
This contemporary living room collection features plush upholstered pieces that are aimed at providing a chic sophisticated look with a comfortable relaxed feel. A stream-lined frame construction with track arms and exposed wood legs, gives this furniture set an appearance that keeps it looking clean while bold colored fabric provides a distinguished elegance. The perfect collection for formal, casual and contemporary styled homes, this furniture set features a sofa, loveseat and chair that can be used together or placed as modern accent pieces.
The 5600 collection is an amazing option if you are looking for Contemporary furniture. Our store serves the Fredericksburg, Richmond, Charlottesville, Virginia and Maryland area.
These images are representative of this group as a whole and may differ from this item.
Information Accuracy - We have taken great care to provide you with information that is accurate and useful. Please notify us if you find an error and we will do our best to correct it. We ask that you contact us directly to confirm information about pricing, color, features, dimensions, availability and lead times.
Nothing on this page may be copied or reproduced without explicit permission.
