This classically styled pillow back sofa features beautiful traditional elements of elegance and grace. The perfect addition to formally styled homes seeking classic style with an un-matched comfort, this sophisticated living room sofa features plush seat cushions with a soft pillow back and traditional rolled and padded arms. From the delicate shag trim of the seat back pillows to the enchanting carved details of the wood face trim, this formal couch makes a beautiful living room adornment.
Exposed Wood Leg
Traditional Styled Pillow Back
Two Plush Upholstered Seat Cushions with Center Face Welt Trim
Four Back Pillows with Two Complimentary Side Pillows
Seat SupportSprings are machine tested for durability and lasting support. A sturdy frame provides an anchor for good seating support, while the filling or cushion, augments it. In frames, 8 gauge no-sag wide loop sinuous springs are “s” shaped and run from the front of the seat to the back. An additional 16-gauge stakewire is attached across from side to side to support these springs. This process is done by pneumatically clamping the springs together to tie the individual springs into one unit to prevent the springs from separating or twisting. Back spring clips are autolocking and are made from nylon to help reduce noise. Back springs are 12-gauge sinuous wire. Seat spring clips are constructed from metal to provide strength and are nylon-lined, reducing noise. This makes for a strong seat and provides superior support.
Seat Support
Springs are machine tested for durability and lasting support. A sturdy frame provides an anchor for good seating support, while the filling or cushion, augments it. In frames, 8 gauge no-sag wide loop sinuous springs are “s” shaped and run from the front of the seat to the back. An additional 16-gauge stakewire is attached across from side to side to support these springs. This process is done by pneumatically clamping the springs together to tie the individual springs into one unit to prevent the springs from separating or twisting. Back spring clips are autolocking and are made from nylon to help reduce noise. Back springs are 12-gauge sinuous wire. Seat spring clips are constructed from metal to provide strength and are nylon-lined, reducing noise. This makes for a strong seat and provides superior support.
Frame ConstructionFrames are built in-house with hardwood, such as oak, ash, birch, or maple (70%) and plywood or OSB (30%). Lumber is cut and graded in Manufacturers own machine room to help insure quality for the foundation of our recliners. Only hardwood lumber is used, never plywood or OSB in stress points or load-bearing areas of frames. Individual frame pieces are reinforced in the corners and stress points by glue, blocks and staples, much more preferable than nails or screws.
Frame Construction
Frames are built in-house with hardwood, such as oak, ash, birch, or maple (70%) and plywood or OSB (30%). Lumber is cut and graded in Manufacturers own machine room to help insure quality for the foundation of our recliners. Only hardwood lumber is used, never plywood or OSB in stress points or load-bearing areas of frames. Individual frame pieces are reinforced in the corners and stress points by glue, blocks and staples, much more preferable than nails or screws.
Padding & ErgonomicsSeat cushions and frame parts are fabricated in manufacturer’s own foam fabrication facilities to control the quality and feel of each piece. Cushion thickness is kept at a minimum of 4.5 inches to promote comfort and support. Cushions are fabricated from superior (1.8 lb. density, 34-lb. compression) foam and wrapped in 1oz. or 1.8 oz Dacron for comfort and protection. All foams are made with Environmentally-friendly Polyol derived from soy beans and castor beans that require up to 60% less fossil fuel resources than petroleum-based polyols (for every 11 pounds of plant-based polyol, a gallon of crude oil is saved. This results in 36% less global warming emissions). Test results are monitored from every shipment, every day to maintain consistency.
Backs and pillows are air-blown with polyurethane foam or polyester fiber to contour to the body for maximum support and comfort.
Padding & Ergonomics
Seat cushions and frame parts are fabricated in manufacturer’s own foam fabrication facilities to control the quality and feel of each piece. Cushion thickness is kept at a minimum of 4.5 inches to promote comfort and support. Cushions are fabricated from superior (1.8 lb. density, 34-lb. compression) foam and wrapped in 1oz. or 1.8 oz Dacron for comfort and protection. All foams are made with Environmentally-friendly Polyol derived from soy beans and castor beans that require up to 60% less fossil fuel resources than petroleum-based polyols (for every 11 pounds of plant-based polyol, a gallon of crude oil is saved. This results in 36% less global warming emissions). Test results are monitored from every shipment, every day to maintain consistency.
Backs and pillows are air-blown with polyurethane foam or polyester fiber to contour to the body for maximum support and comfort.
TailoringFabrics are cut and sewn in each of this manufacturer’s plants. This allows greater flexibility in scheduling and helps monitor quality. One-half inch seams are used and components are sewn together at a minimum of 5 1/2 to 6 seams per inch.
Tailoring
Fabrics are cut and sewn in each of this manufacturer’s plants. This allows greater flexibility in scheduling and helps monitor quality. One-half inch seams are used and components are sewn together at a minimum of 5 1/2 to 6 seams per inch.
Item & Dimensions
ManufacturerSerta Upholstery by Hughes Furniture
Manufacturer
Serta Upholstery by Hughes Furniture
The 7685 Pillow Back Sofa with Carved Wood Face, made by Serta Upholstery by Hughes Furniture,
is brought to you by Powell's Furniture and Mattress. Powell's Furniture and Mattress is a local furniture store, serving the Fredericksburg, Richmond, Charlottesville, Virginia and Maryland area. Product availability may vary.
Contact us for the most current availability on this product.
Collection Details
This sofa, loveseat and (not pictured) chaise collection features formally designed pieces with a luxurious cultured elegance. While a beautifully combined upholstery match creates the look of fine palace fabric, elegant pillow shag trim and carved wood face details create a look of luxury that is classic and lavish. The perfect addition to formally decorated homes, these pieces can be used as accent furniture or combined together for an entire collection.
The 7685 collection is an amazing option if you are looking for Traditional furniture. Our store serves the Fredericksburg, Richmond, Charlottesville, Virginia and Maryland area.
These images are representative of this group as a whole and may differ from this item.
Decorative Wood Face adds Dramatic Effects
Sienna Chocolate and Silas Raisin Pillows Accent with Neutrality
Information Accuracy - We have taken great care to provide you with information that is accurate and useful. Please notify us if you find an error and we will do our best to correct it. We ask that you contact us directly to confirm information about pricing, color, features, dimensions, availability and lead times.
Nothing on this page may be copied or reproduced without explicit permission.